Autonomous Underwater Vehicle’s have already proven their efficiency and reliability for deepwater seabed survey work; based on this, Eca intent is now to widen their use for other applications considered as the next step of the technology : the survey and inspection of underwater structures.

Navajo is suitable for offshore and inshore use. The compact size and weight allows it to be transported and deployed from a small vehicle, yet it is large enough to provide a stable platform for video and sonar surveys.

The SeaBotix LBV150-4 is an affordable streamlined MiniROV system. Added tether length and the integrate control console provide a well rounded system that is simple to setup and operate.

The SeaBotix LBV600-6 is the ideal deep water rapid response portable ROV system. Expand the capability of the LBV1502 systems by adding two (2) additional forward thrusters, increased depth rating to 600m (2,000ft) ........

SeaBotix has developed a revolutionary new product that combines the proven technology and performance of the LBV with the ability to strongly adhere to any hard surface in any orientation.

The Seaeye Falcon and Falcon DR are the choice of many leading operators for capability, versatility and the ability to get the job done. Lightweight and portable they go where they’re needed - inshore, offshore, down tunnels or for yaway operations.

Sub-Atlantic’s fully electric Super Mohawk remotely operated vehicle is an excellent general purpose professional ROV system suitable for observation, survey, pipelay support, light to medium work and NDT inspections.

The Pro 3 XEGTO sports all the features of the top of the line Pro 3XE adding our GTO thrusters which propel the VideoRay to speeds up to 4.1 knots. It ies through the water! The Pro 3 XEGTO is also PC computer control enabled........

The CDL MiniPlexer solves your sensor integration problems when you have more signals to transmit than available copper conductors. The MiniPlexer is a compact low power board set designed to transfer data ......

Standard operation depth of 3000m
Operates on single mode or multi mode optical bres

The MacArtney NEXUS MK IV is replacing the successful NEXUS MK I, which has served the subsea ROV/ROTV market for 6 years since the introduction in 2000. The MK IV is the “Multibeam-Sonar Multiplexer” and does not interface video cameras.

The MacArtney NEXUS MK V multiplexer replaces the NEXUS 907 system. It is still based on the Focal 907 video/data multiplexer combined with the MacArtney MiniControllers, ethernet converters and the Focal Gb-media converters.

Oceanographic Release Transponders (ORTs) and Deep Oceanographic Release Transponders (DORTs) are tough, reliable acoustic releases designed for deployment in either 2,000 metres or 6,000 metres of water.

The Sonardyne Oceanographic Release Transponder (ORT), Type 7409, is an acoustic release which will operate following a sequence of commands provided by the Sonardyne Lightweight Command Unit (LCU) type 7663.

These torque tools have been developed to meet the need for robust, subsea diver or ROV deployment. The tool can be tted with local directional controls, local read out turns counter as has an operating torque range between 10 and 2700 Nm.

The TITAN 4 is widely regarded as the world’s premier servo-hydraulic remote manipulator system. Since 1987, TITAN systems have been the industry standard for dexterous manipulator systems used in subsea applications, and are extensively used on ultra-heavy work class ROVs.

A powerful direct jetting system incorporated within the ZipJet allows the operator to break up heavy and cohesive sea-bed muds and sand prior to excavation.

The cutters have been specially designed specically for cutting in severe working conditions such as offshore and sub-sea service, typically electrical power cables, umbilical cables and hydraulic lines.